BLIND RIVETS

A rivet is a permanent mechanical fastener. Before being installed a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the buck-tail. On installation the rivet is placed in a punched or drilled hole, and the tail is upset, or bucked (i.e., deformed), so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Because there is effectively a head on each end of an installed rivet, it can support tension loads (loads parallel to the axis of the shaft); however, it is much more capable of supporting shear loads (loads perpendicular to the axis of the shaft). Bolts and screws are better suited for tension applications.

Fastenings used in traditional wooden boat building, like copper nails and clinch bolts, work on the same principle as the rivet but were in use long before the term rivet came about and, where they are remembered, are usually classified among the nails and bolts respectively.


Product Details
Brand :
Place of Origin : Not Given
FOB Price :
Minimum Order Quantity : Not Given
Supply Ability :
     
Packaging & Delivery
Packaging Detail : Not Given
Delivery Detail : Not Given
Specifications

CODE

Other Products
 
Privacy Policy - Terms of Use - 2011-2015 Gulf Tour Directory
Copyright Notice 2011-2015 Gulf Tour Directory All rights reserved.